Manualshelf

HP Storage Essentials V5.1 Installation Guide Second Edition (Linux Release) (T4283-96055, November 2006)

ManualsBrandsHP ManualsSoftwareHP Storage Essentials Storage Resource Management Backup Mgr 1 TB Tier-2 LTU
221222223224225226227228229230
Installing the CIM Extension for HP Tru64 UNIX202
Also, verify the following before you install the CIM Extension:
• ”Software Requirements” on page 202
• ”Required Disk Space” on page 202
• ”SNIA HBA API Support” on page 202
Software Requirements
NOTE: You do not need to install the FC-HBA shared libraries if you are running Tru64 UNIX
version 5.1B-4.
If you are running Tru64 UNIX version 5.1B-3 or version 5.1B-2, you must install one of the following
SNIA patches to obtain the FC-HBA shared libraries.
• For Tru64 UNIX version 5.1B-2 - Install T64KIT1000413-V51BB25-E-20060222.
• For Tru64 UNIX version 5.1B-3 - Install T64KIT1000414-V51BB26-E-20060222.
To obtain the patch:
1. Go to the IT Resource Center Web site at the following URL: http://www1.itrc.hp.com/.
2. Use the Search field at the Web site to find the patch number. When you search for the patch,
make sure IT Resource Center (Compaq) is selected.
NOTE: To save time, copy the patch number from the PDF or HTML Installation Guide and
paste it into the Search field.
Required Disk Space
The CIM Extension for Tru64 requires 60 MB under /opt.
Network Port Must Be Open
The CIM Extension uses port 4673 by default to communicate with the management server. Verify
the network port is open. Refer to the documentation accompanying your Tru64 host for more
information. If you need to use a different port, see ”Permanently Changing the Port a CIM
Extension Uses (UNIX Only)” on page 308.
SNIA HBA API Support
The management server can only talk to host bus adapters (HBAs) that support the SNIA HBA API.
Tru64 hosts need to have the hbaapi library installed on the host. See ”Software Requirements” on
page 202.
To verify if hbaapi is installed on the host, check for the presence of the file hba.conf under the
/etc directory. The contents of the file would contain a line, such as the following:
com.hp.emulex /usr/shlib/libemxhbaapi.so
Verify the presence of the shared library file mentioned in the hba.conf file.