HP Storage Essentials V5.1 Installation Guide Second Edition (Linux Release) (T4283-96055, November 2006)

Installing the CIM Extension for HP Tru64 UNIX208
If you have already added the host to the discovery list (Tools > Storage Essentials > Home >
Discovery > Setup) on the management server, you must remove it and then re-add it. You cannot
have more than one listing of the host with different ports.
Additional Parameters
The following table describes additional parameters that can be specified in the
cim.extension.parameters file:
Finding the Version of a CIM Extension
You can find the version number of a CIM Extension:
1. Go to the /opt/APPQcime/tools directory.
2. Type the following at the command prompt:
# ./start -version
You are shown the version number of the CIM Extension and the date it was built, as shown in the
following example:
Starting CIM Extension for Tru64
Thu Sep 21 14:46:47 EDT xxxx
CXWS x.x.x.x on /192.168.1.5:4673 now accepting connections
where
• xxxx is the year.
• x.x.x.x is the version of CIM Extension
• 192.168.1.5 is the IP address of the host
Table 1 Parameters for CIM Extensions
Parameter Description
-user The user defined in this parameter must be a valid user for the
host. Only the user needs to be defined. The user name and
password are provided from the management server during
discovery. The user does not need to have root authority. A
colon separated list can be used to specify multiple users.
-credentials
<username from the
management server>
:<password>
The credentials defined by this parameter must match the
values entered from the management server during discovery.
They are not used as authentication on the host itself.
-agentnic
<ip address>
Restricts the CIM Extension on multihomed systems to listen only
on the designated IP address.
-mgmtServerIP
<ip address>
Restricts the CIM Extension to listen only to a specific
management server IP address.