HP Storage Essentials V5.1 Installation Guide Second Edition (Linux Release) (T4283-96055, November 2006)

Storage Essentials 5.1 Installation Guide 221
Driver Information for Verifying SNIA Emulex Adapters
The SNIA Library comes from a separate package HBAnyware. If you installed SNIA Emulex
adapter, you can find its library by entering the following at the command prompt:
# more /etc/hba.conf
The following is displayed:
com.emulex.emulexapilibrary /usr/lib/libemulexhbaapi.so
com.emulex.emulexapilibrary /usr/lib/sparcv9/libemulexhbaapi.so
Driver Information for QLogic Adapters
The SNIA HBA package comes from a separate package QLSDMLIB. If you installed the QLogic
Adapter, you can find its library by entering the following at the command prompt:
# more /etc/hba.conf
The following is displayed:
qla2x00 /usr/lib/libqlsdm.so
Driver Information for AMCC/JNI Adapters
The SNIA HBA driver for AMCC/JNI adapters comes from a separate package JNIsnia. You can
find its library by entering the following at the command prompt:
# more /etc/hba.conf
The following is displayed:
JniHbaLib /opt/JNIsnia/Solaris/Jni/32bit/JniHbaLib.so
JniHbaLib /opt/JNIsnia/Solaris/Jni/64bit/JniHbaLib.so
Driver Information for Sun Leadville branded
QLogic or JNI Adapters
The SNIA HBA comes from the Sun StorEdge SAN Foundation Suite. Package SUNWfchba installed
as part of suite. You can find its library by entering the following at the command prompt:
# more /etc/hba.conf
The following is displayed:
com.sun.fchba /usr/lib/libsun_fc.so.1
com.sun.fchba64 /usr/lib/sparcv9/libsun_fc.so.1
Installing the CIM Extension
Keep in mind the following:
• The instructions in this section apply if you are doing a local installation of the CIM Extension, as
compared to a scripted or push installation. If you want to perform a scripted or push installation
of the CIM Extension, first install the CIM Extension locally by using the instructions in this
section. Then, perform the scripted or push installation. The instructions in this section only need
to be performed once if you are doing a scripted or push installation. Contact customer support
for information about performing a scripted or push installation.