HP Storage Essentials Storage Resource Management Report Optimizer Software 6.0 Performing On-Report Analysis with Web Intelligence (August 2008)

Inserting standard calculations188
Inserting and removing calculations
You can insert predefined calculations into Web Intelligence reports. These predefined
calculations allow you to perform standard business calculations on your data. For a list of
available predefined calculations, see ”Available predefined calculations” on page 187.
You add calculations from the toolbar or from the right-click menu.
To insert a calculation from the toolbar
1. Select the column to which you wish to add the calculation.
2. Display the
Report toolbar by selecting View from the menu, then selecting Toolbars,
then selecting
Report.
3. Click the
Calculations button on the toolbar to insert the default calculation (SUM).
Or
Click the arrow at the right of the calculation button, and then select the calculation you
want from the list of predefined calculations.
Web Intelligence adds a footer to the column and places the calculation formula and
result in it. (In the case of the PERCENTAGE calculation Web Intelligence adds an
additional column to the table to hold the results of the calculation.)
To insert a calculation from the menu
1. Select a cell in the column to which you want to add a calculation.
2. Right-click, select
Calculation then select the calculation from the sub menu.
The calculations that you have already added are marked in the menu. To remove a
calculation that you added previously, select it again from the menu.