HP Storage Essentials Storage Resource Management Report Optimizer Software 6.0 Performing On-Report Analysis with Web Intelligence (August 2008)

Performing On-Report Analysis with Web Intelligence 51
1. Verify you are working in Drill mode.
The Start Drill Mode button is pressed in when you are in Drill mode.
2. Right click or rest your pointer on the chart bar or marker on which you want to drill up.
3. Click the Drill Up arrow on the chart axis or click the chart bar, line, or marker directly.
The drilled results appear in the chart.
To drill on pie chart legend
1. Verify you are working in Drill mode.
The Start Drill Mode button is pressed in when you are in Drill mode.
2. Right click or rest your pointer on the legend value on which you want to drill down.
The drilled results appear in the pie chart.
Changing how drilled results are filtered
When you drill on a dimension or measure value in a table or chart, Web Intelligence
filters the drilled results by the dimension or measure you drilled on. The filter is applied to
all of the results displayed on the drilled report.
For example, if you drill down on a table cell displaying “California,” to view results for
cities in California, Web Intelligence filters the values in the entire report for California and
only displays results for California in the report. If you want to see results for cities in a
different US state, such as Florida, on the drilled report you can simply change the filter
value by selecting “Florida” from the drill filter list box.
Drill up arrow
Legend values