HP Storage Essentials Storage Resource Management Report Optimizer Software 6.0 Performing On-Report Analysis with Web Intelligence (August 2008)

Analyzing results52
Note: You can set your Web Intelligence Document Preferences so that the Drill filters
are either shown or hidden during your drill sessions. For information on how to do this,
see ”To set your drill options” on page 27.
To change the values that filter drilled results
1. Verify you are working in Drill mode.
The Start Drill Mode button is pressed in when you are in Drill mode.
2. In the Drill toolbar, click the drop-down arrow in the appropriate list box.
Each dimension value associated with that filter appears.
3. Click the value you want.
Or
If you want to remove the filter, scroll to the top of the list, and then select
( )
<ObjectName>
For example, to remove the filters on the [Lines] dimension, select:
( ) Lines
The report displays results based on the new dimension value.
Drilling beyond report results
When you are drilling a Web Intelligence report, you may want to drill up or down to a
dimension that lies outside the scope of analysis defined for the document. To return the
additional data, Web Intelligence must run a new query that includes the additional
dimension(s) you specify. This is called extending the scope of analysis.
When you extend the scope of analysis, you can select filters to limit the data Web
Intelligence retrieves when running the new query. This saves time, if you are working with
a large document. If you have several reports in one document, and you select filters when
you extend the scope of analysis, those filters affect all the reports in the document.