HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

CLI Commands28
appiqshow -event -elementid <element id> -severity <severity>
Description: Provides a detailed description of events from the specified element and with
specified severity value.
where
• <element id> is the identifier for the element. The element identifier can be obtained from
several methods. For example, the element identifier for a storage system can be obtained
from the appiqlist -device -storagesystem -all command.
• <severity> - is the severity of the event. See Table 3 on page 20 for more information. All
severities are included if you do not include the severity flag.
appiqshow -event -elementid <element id>
-startdate <yyyy-mm-dd|today> -starttime
<hh:mm|now> -enddate <yyyy-mm-dd|today>
-endtime <hh:mm|now>
Description: Provides detailed information of all the events for a specified element and between
the specified time intervals.
where
• <element id> - is the identifier for an element.
• <yyyy-mm-dd|today> - is the date or today can be entered, for example 2005-05-23.
• <hh:mm|now> - is the time (24-hour clock) or now can be entered, for example 10:45.
appiqshow -event -elementid <element id> -severity
<severity> -startdate <yyyy-mm-dd|today> -starttime
<hh:mm|now> -enddate <yyyy-mm-dd|today>
-endtime <hh:mm|now>
Description: Provides detailed information of all the events for a specified element, severity and
between the specified time intervals.
where
• <element id> - is the identifier for an element.
• <yyyy-mm-dd|today> - is the date or today can be entered, for example 2005-05-23.
• <hh:mm|now> - is the time (24-hour clock) or now can be entered, for example 10:45.
• <severity> - is the severity of the event. See Table 3 on page 20 for more information. All
severities are included if you do not include the severity flag.
appiqshow -event -elementid <element id> -type
<eventtype> -startdate <yyyy-mm-dd|today> -starttime