HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

CLI Commands42
appiqlist -device -host <id> -targetmapping
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists the target mappings of the host specified.
appiqlist -device -host <id> -diskdrive
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists the disk drives connected to the host specified.
appiqlist -device -host <id> -logicaldisk
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists the logical drives of the host specified.
appiqlist -device -host <id> -volume
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists volume manager volumes of the host specified.
appiqlist -device -host <id> -partition
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists the partitions of the host specified.
appiqlist -device -host <id> -multipathdevice
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists the multi-path devices connected to the host specified.
appiqlist -device -host <id> -processor
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Lists the processors connected to the host specified.
appiqshow -device -host -all
Description: Provides a detailed description of the components on the hosts detected by
management server.