HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

Storage Essentials 5.00.01 CLI Guide 43
appiqshow -device -host <id>
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides a detailed description of the host specified.
appiqshow -device -host <id> -all
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides a detailed description of the specified host’s components.
appiqshow -device -host <id> -port
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides a detailed description of the fibre channel ports connected to the host
specified.
appiqshow -device -host <id> -application
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides a detailed description of the applications on the host specified.
appiqshow -device -host <id> -hba
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides a detailed description of the host bus adapters connected to the host
specified.
appiqshow -device -host <id> -targetmapping
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides a detailed description of the target mappings of the host specified.
appiqshow -device -host <id> -diskdrive
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides a detailed description of the disk drives connected to the host specified.
appiqshow -device -host <id> -logicaldisk
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.