HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

CLI Commands44
Description: Provides a detailed description of the specified host’s logical disks.
appiqshow -device -host <id> -volume
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides a detailed description of the volume manage volumes on the host specified.
appiqshow -device -host <id> -partition
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides a detailed description of the partitions on the host specified.
appiqshow -device -host <id> -multipathdevice
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides a detailed description of the multi-path devices on the host specified.
appiqshow -device -host <id> -processor
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides a detailed description of the processors on the host specified.
appiqstats -device -host -all
Description: Provides statistics about the hosts the management server discovers.
appiqstats -device -host <id>
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides statistics about the host specified.
appiqstats -device -host <id> -logicaldisk
where <id> is the host identifier. The host identifier can be obtained from several methods, such as
from the appiqlist -device -host -all command.
Description: Provides statistics about the logical disks on the specified host.
Host Security Groups
Use the following CLI commands to manage host security groups: