HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)
Table Of Contents
CLI Commands58
The number after the first colon is the identifier for the element. The item after the second colon is the
name of the element.
appiqlist -device -storagesystem <storage system id>
-all
where <storage system id> is the storage system identifier. The storage system identifier can
be obtained from several methods, such as from the appiqlist -device -storagesystem
-all command.
Description: Provides a list of the subcomponents of the specified storage system.
appiqlist -device -storagesystem <ssid> -port
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a list of the ports for the storage system specified.
appiqlist -device -storagesystem <ssid> -lun
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a list of the LUNs for the storage system specified.
appiqlist -device -storagesystem <ssid> -pool
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Lists the storage pools for the storage system specified.
appiqlist -device -storagesystem <ssid> -volume
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
To view volume information for HiCommand storage systems, use the AppIQList -device
-storagesystem <ssid> -unmappedvolume and AppIQList -device
-storagesystem <ssid> -mappedvolume commands. See the topic, ”Volumes” on page 67
for more information.
Description: Lists the volumes for the storage system specified.
appiqlist -device -storagesystem <ssid>
-storagecapability
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Lists the storage capabilities for the storage system specified.