HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

Storage Essentials 5.00.01 CLI Guide 59
appiqlist -device -storagesystem <ssid> -drive
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Lists the drives for the storage system specified.
appiqlist -device -storagesystem <ssid> -extent
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Lists the extents for the storage system specified.
appiqlist -device -storagesystem <ssid>
-hostsecuritygroup
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Lists the host security group for the storage system specified.
appiqlist -device -storagesystem <ssid>
-maskingcapabilities
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Lists of the masking capabilities for the storage system specified.
appiqlist -device -storagesystem <ssid>
-unmappedvolume
where <ssid> is the identifier for a storage system. The storage system identifier can be found
through several methods, such as from the appiqlist -device -storagesystem -all
command.
Description: Lists the unmapped volumes for the storage system specified.
appiqlist -device -storagesystem <ssid>
-mappedvolume
where <ssid> is the identifier for a storage system. The storage system identifier can be found
through several methods, such as from the appiqlist -device -storagesystem -all
command.
Description: Lists the mapped volumes for the storage system specified.
appiqlist -device -storagesystem <ssid>
-storageclientsettings
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.