HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

CLI Commands62
appiqshow -device -storagesystem <ssid>
-maskingcapabilities
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the masking capabilities for the storage system
specified.
appiqshow -device -storagesystem <ssid>
-storageclientsettings
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides a detailed description of the storage client settings for the storage system
specified.
appiqstats -device -storagesystem -all
Description: Provides statistics about the storage systems the management server discovers.
appiqstats -device -storagesystem <ssid>
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides statistics about the storage system specified.
appiqstats -device -storagesystem <ssid> -pool
where <ssid> is the storage system identifier. The storage system identifier can be obtained from
several methods, such as from the appiqlist -device -storagesystem -all command.
Description: Provides statistics about the storage pools on the specified storage systems.
Switches
Use the following types of CLI commands to obtain information about switches:
• appiqlist - Lists information about the components of the switch
• appiqshow - Provides a detailed description of the components in the switch
appiqlist -device -switch -all
Description: Lists the switches the management server detects.
Example:
C:\cli>appiqlist -device -switch -all
Switch:1005:QBrocade2
Switch:1007:QBrocade5
Switch:1008:AppIQ_ED-6064