HP Storage Essentials V5.00.01 CLI guide (T4283-96015, January 2006)

Storage Essentials 5.00.01 CLI Guide 65
appiqstats -device -switch <switch id>
where <switch id> is the switch identifier. The switch identifier can be obtained from several
methods, such as from the appiqlist -device -switch -all command.
Description: Provides statical information about a specified switch.
Tape Libraries
Use the following types of CLI commands to obtain information about tape libraries:
• appiqlist - Lists information about the components of the tape libraries
• appiqshow - Provides a detailed description of the components in the tape libraries
appiqlist -device -tapelibrary -all
Description: Provide a list of all the tape libraries that the management server detects.
appiqlist -device -tapelibrary <library ID>
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description
: Provides the name of the specified tape library.
appiqlist -device -tapelibrary <library ID> -all
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provide a list of all the subcomponents (port, media access device, controller cards
and changer devices) that belong to the specified tape library.
appiqlist -device -tapelibrary <library ID> -port
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a list of all fibre channel ports that belongs to the specified tape library.
appiqlist -device -tapelibrary <library ID>
-mediaaccessdevice
where <library id> is the identifier for the tape library. The identifier for the tape library can be
obtained from several methods, such as from the appiqlist -device -tapelibrary -all
command.
Description: Provides a list of all media access devices that belongs to the specified tape library.