HP Storage Essentials V5.00.01 user guide (T4283-96012, January 2006)

Configuring the Management Server180
Setting the Date and Time for Report Collectors
IMPORTANT: After you click OK, the collector starts immediately if the date and time you set has
not passed. If the set time has passed, the collector starts two minutes after you click OK.
To set the date and time, do the following:
1. Click Reports > Storage Essentials > Report Configuration in HP Systems Insight
Manager. Then, click the Data Collection tab.
2. Click the Stop button corresponding to the collector you want to stop.
3. Click the Edit button, .
4. Click the calendar icon, .
5. Enter the time in the time field. Make sure the time resembles a 24-hour clock, for example
22:00 for 10 p.m.
6. Click the date.
The date is highlighted in pink.
You can navigate the calendar as follows:
- Displays the same month in the previous year
- Displays the previous month
- Displays the next month
- Displays the same month in the following year
7. When you are done, click the Set button.
The management server displays the date and time.