HP OpenView Storage Mirroring User Guide (360226-002, May 2004)

9 - 12
3. To determine the current status of the verification log append setting, use the get command with the
VerifyLogAppend option.
4. To modify the verify log file append setting, use the set command with the VerifyLogAppend option. The
VerifyLogAppend option is set to 1 for append or 0 for overwrite. By default, log file is appended.
5. To determine the maximum file size of the verification log, use the get command with the VerifyLogLimit option.
6. To modify the maximum file size of the verification log in bytes, use the set command with the VerifyLogLimit
option. The default size is 1048576 bytes and is limited by the available hard drive space up to 4194304 KB (4 GB).
Examples
! set netport=1100
! set VerifyLogName=”HA server.log”
! set DefaultAddress=”129.12.34.3”
Notes ! Some settings, although immediately applied to Storage Mirroring, will not take effect until the
client or service is restarted. For example, the Text Client must be closed and reopened for a
change to ClientLogName to take effect. And the service must be restarted to cause a change in
the modules loaded if the LoadSourceTarget setting is changed.
! If you do not specify a machine name, the value from the current source will be updated. If you
have not identified an active source, no changes will be made.