HP OpenView Storage Mirroring User Guide (360226-002, May 2004)

10 - 4
Setting bandwidth limitations
1. Select the Bandwidth option in the Limit Type box.
2. Mark the Limit Bandwidth check box to enable the bandwidth limiting features.
3. Define the bandwidth available for Storage Mirroring transmission
! Connection Speed—Specify the total bandwidth capacity that is available
! Percentage—Specify the percentage of bandwidth to be used for Storage Mirroring transmissions
The
Transfer Rate will automatically be calculated.
4. If no additional transmission options need to be set, establish the connection by clicking Connect.
NOTE: The only value that is persistently stored is the Transfer Rate. When the page is refreshed, the percentage and
available bandwidth may not be the same value that you entered. Stoarge Mirroring changes these values
to the maximum values for the smallest possible link. For example, if you enter
10% of T1, this is equivalent to
19300 bytes/second. If you select another transmit option or another tab of the Connection Manager and
then return to the bandwidth option, Storage Mirroring will change the value to 60% of 256 Kbps which
is also equivalent to 19300 bytes/second.