HP OpenView Storage Mirroring User Guide (360226-002, May 2004)

11 - 25
7. To remove an IP address from an established monitor, use the monitor remove command.
8. Configure the failover settings by using the monitor option command.
Command MONITOR REMOVE
Description Removes an IP address that is currently being monitored
Syntax
MONITOR REMOVE <IP_address> [monitor]
Options ! IP_address—The currently monitored IP address that should be removed
! monitor—Name of the source machine designated as the monitor
Examples
! monitor remove 205.31.2.57 indy
! monitor remove 205.31.2.68
Notes If you do not specify a monitor, the current source designated as the monitor will be used. If you
have not identified a monitor, you will receive an error message stating that a monitor has not been
selected.
Command MONITOR OPTION
Description Configures the settings to determine how failover will be performed
Syntax
MONITOR OPTION [MOVENAME | NOMOVENAME] [MOVEADDRESSES | NOMOVEADDRESSES]
[MOVESHARES | NOMOVESHARES] [ADD | REPLACE]
[, USESHAREFILE | NOUSESHAREFILE][, FAILONE | FAILALL]
[, FODELAY | NOFODELAY] [, FBDELAY | NOFBDELAY]
[, INTERVENTION | NOINTERVENTION] [monitor]
Options ! MOVENAME—Moves the server name during failover
! NOMOVENAME—Does not move the server name during failover
! MOVEADDRESSES—Moves the IP address(es) during failover
! NOMOVEADDRESSES—Does not move the IP address(es) during failover
! MOVESHARES—Moves the shares during failover
! NOMOVESHARES—Does not move the shares during failover
! ADD—Specifies the source machine’s identity is added to the target machine’s identity when
failover occurs
! REPLACE—Specifies that the source machine’s identity replaces the target machine’s identity
when failover occurs
! USESHAREFILE—Use the Storage Mirroring generated .shr file to determine shares
! NOUSESHAREFILE—Do not use the Storage Mirroring generated .shr file to determine shares
! FAILONE—When multiple IP addresses exist on a monitor machine, only the failed address is
failed over to the target machine
! FAILALL—When multiple IP addresses exist on a monitor machine, all of the addresses will fail
over to the target machine even if only one address fails
! FODELAY—Guarantees that the pre-failover script has completed before failing over
! NOFODELAY—Does not guarantee that the pre-failbover script has completed before failing over
! FBDELAY—Guarantees that the pre-failback script has completed before failing back
! NOFBDELAY—Does not guarantee that the pre-failback script has completed before failing back
! INTERVENTION—Specifies that network administrator intervention is required before failover
begins
! NOINTERVENTION—Specifies that network administrator intervention is not required before
failover begins
! monitor—Name of the source machine designated as the monitor