HP OpenView Storage Mirroring User Guide (360226-002, May 2004)

14 - 28
TGThreadCount This setting is no longer used
TGUnfinishedOp
Event
Specifies whether or not unfinished operations on the target are logged to the Event Viewer
Values: (0) Unfinished operation messages are not logged
(
1) Unfinished operation messages are logged
Default: 0
GUI Setting: None
TGWriteCache Specifies whether or not Storage Mirroring uses the intermediate cache
Values: (0) Bypass the intermediate cache and write directly to diks
(
1) Do not bypass the intermediate cache
Default: 1
GUI Setting: None
TGWriteFailure
BeforeNotification
Specifies the number of times an operation will be retried on the target before a notification is
sent to the source to update the
Target Status field of the Management Console.
Values: 0-1024
Default: 10
GUI Setting: None
If you change the setting to 0, the notification will be disabled.
Changing this option will only affect how the status is changed on the
Target Status field of the
Management Console. To solve the underlying issue of why the operations are failing will require
investigation into the Storage Mirroring log files.
UNetPort Port connection for UDP communications
Values: 1025 - 65535
Default: 1100
GUI Setting: Server Properties, Network tab, Interface, Heartbeat Transmit Port
Management Console, File, Options, Configuration tab, Automatic Service Discovery, Heartbeat
Advertisement, Port
If you change this value, the source service must be stopped and restarted to implement the
change.
UpdateInterval Interval, in seconds, at which the Failover Control Center updates the monitored machines
display
Values: 1 - 9999
Default:
1
GUI Setting
: Failover Control Center, Settings, Refresh Rate
UpgradeCode Used by the Storage Mirroring installation program to maintain the installation settings for an
upgrade
UseEventLog Specifies whether or not messages are logged to the Windows Event Viewer
Values: (0) Do not log messages to the Event Viewer
(
1) Log messages to the Event Viewer
Default:
1
GUI Setting
: None
UserIntervention Specifies whether or not user intervention is required to initiate a failover
Values: (0) User intervention is not required
(
1) User intervention is required
Default:
1
GUI Setting
: Failover Control Center, Monitor Settings, Manual Intervention
Program Setting Description