HP OpenView Storage Mirroring User Guide (360226-002, May 2004)

A - 16
Monitor Remove
Monitor Script Add
Command MONITOR REMOVE
Description Removes an IP address that is currently being monitored
Syntax
MONITOR REMOVE <IP_address> [monitor]
Options ! IP_address—The currently monitored IP address that should be removed
! monitor—Name of the source machine designated as the monitor
Examples
! monitor remove 205.31.2.57 indy
! monitor remove 205.31.2.68
Notes If you do not specify a monitor, the current source designated as the monitor will be used. If you
have not identified a monitor, you will receive an error message stating that a monitor has not been
selected.
Command MONITOR SCRIPT ADD
Description Specifies the scripts that should be run during the failover and failback processes
Syntax
MONITOR SCRIPT ADD <type> <script_name> [monitor]
Options ! type—Any of the following script types:
! PREFAILOVER—Specifies that the file is a pre-failover script to be run on the target before
failover occurs
! POSTFAILOVER—Specifies that the file is a post-failover script to be run on the target after
failover occurs
! PREFAILBACK—Specifies that the file is a pre-failback script to be run on the target before
failback occurs
! POSTFAILBACK—Specifies that the file is a post-failback script to be run on the target after
failback occurs
! SRCPOSTFAILBACK—Specifies that the file is a post-failback script to be run on the source
after failback occurs
! script_name—Full path and name of the script file
! monitor—Name of the source machine designated as the monitor
Examples
monitor script add prefailback “c:\program files\OpenView\Storage
Mirroring\preback.bat”
Notes If you do not specify a monitor, the current source designated as the monitor will be used. If you
have not identified a monitor, you will receive an error message stating that a monitor has not been
selected.