HP OpenView Storage Mirroring User Guide (360226-002, May 2004)

A - 32
Status
Target
Testcon
Command STATUS
Description Requests connection and statistical information
Syntax
STATUS CONNECT | MIRROR | REPLICATE | TRANSMIT <con_id>
Options
! CONNECT—Displays connection information
! MIRROR—Displays mirroring information
! REPLICATE—Displays replication information
! TRANSMIT—Displays transmission information
! con_id—Connection ID assigned to the source/target connection
Examples
! status connect 1
! status replicate 1
Command TARGET
Description Identifies a machine as the active target machine
Syntax
TARGET <target_machine>
Options target_machine—Name of the machine
Examples
target jersey
Notes You must be logged into a machine using the login command before using the target command.
Command TESTCONNECTIONS
Description Sends a test command to determine if Storage Mirroring is running. If there are active connections,
the replication set(s), IP address(es), and connection ID(s) will be included in the
testcon log file.
Syntax TESTCONNECTIONS <machine> [ filename [OVERWRITE]]
Options
! machine—The name of the machine
! filename—The name of the log file
! OVERWRITE—Indicates that existing data in the file will be overwritten
Examples
testcon indy connstat
Notes ! The default log file is status.dts.
! The log file is located in the same directory as the other Storage Mirroring log files.
! The file extension .dts is appended to any file name supplied.
! By default, the log file is not overwritten.