HP OpenView Storage Mirroring User Guide (360226-002, May 2004)

C - 21
! Network to use—If you have more than one route for network traffic defined, specify the network that this IP
address will use. This should be the same network that the clients are using.
g. Click Finish to complete the creation of the IP Address resource.
3. Create a Network Name resource for the new group.
a. Right-click the group and select New, Resource.
b. Specify the following fields on the New Resource dialog box:
! Name—Specify a name that identifies this resource as the virtual server name. This name must be unique
within the cluster.
! Description—You can optionally add a more detailed description for this resource.
! Resource type—Specify Network Name.
! Group—The resource group name should be selected. If it is not, select the correct group name.
c. Click Next to continue.
d. Verify that both nodes appear as Possible Owners and click Next to continue.
e. An IP address must be present in order for a network name to be assigned. Therefore, move the IP address
resource associated with the virtual server to the Resource dependencies list and click Next to continue.