HP OpenView Storage Mirroring User Guide (360226-002, May 2004)

3 - 3

Logging on and off of Storage Mirroring

To ensure protection of your data, Storage Mirroring uses native operating system security and requires a valid system

username and password. If you do not have a valid system username and password for a selected machine, you will not be

able to configure Storage Mirroring for that machine.

As you enter DTCL commands, Storage Mirroring automatically attempts to log on to the source or target machine. You can

verify your access by the resulting message.

! DT_Full_Access—You have administrator rights to the selected Storage Mirroring machine.

! DT_Monitor_Only_Access—You have monitor rights to the selected Storage Mirroring machine.

! DT_No_Access—You do not have any rights to the selected Storage Mirroring machine.

You can also verify your access at the top of the Text Client screen depending on the commands you have entered and the

information displayed in the upper half of the screen.

If you have monitor access or no access and want to log on as the administrator, use the

by using the logout command. Both commands are outlined on the following page.

Storage Mirroring version 4.3

Source Machine: indy Access Level: FULL)

================================================================================

Command: login indy administrator ******** domain_name

================================================================================

User access level set to DT_FULL_ACCESS

>source indy