HP OpenView Storage Mirroring User Guide (360226-002, May 2004)

5 - 13
b. To modify whether or not the replication set size will be calculated when the connection is established, use the set
command with the
CalculateOnConnect option. The CalculateOnConnect option is set to 1 for enabled or 0
for disabled. By default, the replication set size will be calculated.
Command SET
Description The Text Client/DTCL sends a request to Storage Mirroring to modify the value of a Storage
Mirroring program setting. The setting is immediately applied and is then forwarded to the registry
where it is also applied.
Syntax
SET <option>=<value> [machine]
Options ! option—See Storage Mirroring Text Client program settings on page 14-11.
! value—See Storage Mirroring Text Client program settings on page 14-11.
! machine—Name of the machine
Examples
! set netport=1100
! set VerifyLogName=”HA server.log”
! set DefaultAddress=”129.12.34.3”
Notes ! Some settings, although immediately applied to Storage Mirroring, will not take effect until the
client or service is restarted. For example, the Text Client must be closed and reopened for a
change to ClientLogName to take effect. And the service must be restarted to cause a change in
the modules loaded if the LoadSourceTarget setting is changed. See
Storage Mirroring Text Client
program settings
on page 14-11 for details on each configuration option.
! If you do not specify a machine name, the value from the current source will be updated. If you
have not identified an active source, no changes will be made.