HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

14 - 28
NICList
Orphans Start
Orphans Stop
Command NICLIST
Description Displays the NICs available on the specified target machine. Each NIC is
assigned an integer value and this value is used in the monitor move
command.
Syntax
NICLIST [target]
Options target—Name of the target, an IP address on the target, or a virtual IP
address
Examples
niclist beta
Notes
 If you do not specify a machine name, the value from the current target
will be returned. If you have not identified a target, no data will be
returned.
 If you have not logged into the target machine, no data will be displayed.
 Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.
Command ORPHANS START
Description Manual operation to remove any orphan files on the target
Syntax
ORPHANS START con_id [CLEARRESTOREREQUIRED]
Options
 con_id—Connection ID assigned to the source/target connection
 CLEARRESTOREREQUIRED—Clears the restore required flag and
initiates the orphan operation
Examples
orphans start 1
Command ORPHANS STOP
Description Stops the process to remove orphan files on the target
Syntax
ORPHANS STOP con_id
Options con_id—Connection ID assigned to the source/target connection
Examples
orphans stop 1