HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

14 - 38
Schedule Enable
Schedule End
Command SCHEDULE ENABLE
Description Enables the transmission schedule
Syntax
SCHEDULE <target> ENABLE
Options target—Name of the target, an IP address on the target, or a virtual IP
address Depending on the network route Storage Mirroring uses to access the
target, you may need to specify the fully qualified domain name.
Examples
schedule beta enable
Notes Target names that contain non-alphanumeric characters must be enclosed in
quotation marks.
Command SCHEDULE END
Description Sets criteria to end the transmission of data from the source to the target
Syntax
SCHEDULE <target> END [ DURATION = <number> <time_units> ]
[ BYTES = <
bytes> ]
Options
 target—Name of the target, an IP address on the target, or a virtual IP
address Depending on the network route Storage Mirroring uses to access
the target, you may need to specify the fully qualified domain name.
 number—Any number indicating the length of time before the
transmission ends
 time_units—Minutes (min), hours (hr), or days (day)
 bytes—Number of bytes transmitted before the transmission ends
Examples
schedule beta end duration=3 hr bytes=1500000
Notes
 If you use both of the end options, duration and bytes, the transmission
will be stopped when the first end option value is met.
 Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.