HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

9 - 3
Controlling a target manually
1. Pause the execution of operations on the target by using the pausetarget command on a
target that you are logged in to.
2. Resume the execution of operations on the target by using the resumetarget command on a
target that you are logged in to.
Command PAUSETARGET
Description Allows you to pause the execution of Storage Mirroring operations on the
target
Syntax
PAUSETARGET <target> [FROM <source>]
Options
 target—Name of the target, an IP address on the target, or a virtual IP
address
 source—Name of the source
Examples
pausetarget beta
Notes
 You must be logged on to the target machine for this command to work.
 If the target machine has not been identified using the target command,
you must specify the target name in the command.
 Options that contain non-alphanumeric characters must be enclosed in
quotation marks.
Command RESUMETARGET
Description Allows you to resume the execution of Storage Mirroring operations on the
target
Syntax
RESUMETARGET <target> [FROM <source>]
Options
 target—Name of the target, an IP address on the target, or a virtual IP
address
 source—Name of the source
Examples
resumetarget beta
Notes
 You must be logged on to the target machine for this command to work.
 Options that contain non-alphanumeric characters must be enclosed in
quotation marks.