HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

13 - 4
CalculateOn
Connect
Specifies whether or not the replication set size should be calculated on
connection
Values:
0 Do not calculate on connection
1 Calculate on connection
Default:
1
GUI Setting: Connection Manager, Mirroring tab, Calculate Replication Set
size on connection
CaseSensitiveRep
SetQueries
This entry is no longer used.
ChecksumAll Setting to allow for the difference checksum option on mirror, verify, or
restore to ignore the date, time, and size of the file and perform a checksum
calculation on all files
Values: 0 Checksum using date, time, size comparison
1 Checksum all files regardless of the date, time, or file size
Default: 1
GUI Setting: Server Properties, Source tab, Mirroring or Verify, Use
Checksum on All blocks of data during a Difference Mirror
Cleaner Specifies if a clean mirror will delete files on the target before mirroring
Values:
0 Do not delete files before mirroring
1 Delete files before mirroring
Default:
0
GUI Setting: None
This option is only valid if you have this option enabled and use the
clean
option with the DTCL mirror command.
ClientLog This setting is no longer used.
ClientLogName This setting is no longer used.
ConnectionFile Name of the database file containing connection information
Values: any valid file name
Default:
connect.sts
GUI Setting: Server Properties, Database tab, Database Files, Connection
DataPath The location of the Storage Mirroring file attribute, replication set, connection,
and schedule database files
Values: any valid path
Default: the location where the Storage Mirroring files were installed
GUI Setting: Server Properties, Database tab, Database Files, Folder
DefaultProtocol The default protocol
Values:
1 IP protocol
Default:
1
GUI Setting: Server Properties, Network tab, Interface, Default Protocol
TCP/IP is the only protocol currently supported.
Server Setting Description