HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

13 - 5

DirUNetPort Port used for directed UDP communications

Values:

1025 - 65535

Default: 1105

GUI Setting: Server Properties, Network tab, Interface, Network, Status

Listen Port

Management Console, File, Options, Network, Status Transmit Port

If you change this value, the source service must be stopped and restarted to

implement the change.

EmailEnabled Specifies if e-mail notification is enabled

Values:

0 E-mail notification is disabled

1 E-mail notification is enabled

Default:

GUI Setting: Server Properties, E-mail Notification tab, Enable notification

This is a read-only setting. If you change this setting using the DTCL SET

command or via the registry editor, e-mail notification will not automatically

start. You must use the GUI or the DTCL EMAIL ENABLE command to start

e-mail notification.

EmailExcludeIds Identifies the Windows Event Viewer messages that are excluded from e-mail

notification.

Values: Comma or semicolon separated list of Event Viewer IDs. You can

indicate ranges within the list.

Default: None

GUI Setting: Server Properties, E-mail Notification tab, Exclude these Event

IDs

You must disable and re-enable e-mail notification for a change to take effect.

EmailFromAddress Specifies the e-mail address that will appear in the From field of Storage

Mirroring generated e-mail messages.

Values: Any valid e-mail address, up to 256 characters

Default: None

GUI Setting: Server Properties, E-mail Notification tab, From Address

EmailInclude