HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

13 - 7
EmailUsername The user ID required for SMTP server authentication
Values: Any valid user ID text
Default: None
GUI Setting: Server Properties, E-mail Notification tab, Log on to SMTP
Server, Username
Since the username is encrypted for security, this entry cannot be displayed
or changed through the registry or through DTCL.
Enable
Performance
Tracking
This entry will be used in the future.
EnableTaskCmd
Processing
Queues tasks inline with replication data
Values:
0 Disable task command processing
1 Enable task command processing
Default:
0
GUI Setting: Server Properties, Setup tab, Setup Options, Enable Task
Command Processing
ExtensionNumber Used by the Storage Mirroring log files.
FCCHelpPath The path and file name to the Failover Control Center online help file
Default:
C:\Program Files\StorageWorks\Storage
Mirroring\online help\fcc\ wwhelp.htm
GUI Setting: None
Do not change this value or the online help will not work.
FileQueueSize When a mirror is started, one thread reads from the disk and builds the file
queue. Another set of threads reads files off of the queue and sends them to
the target. This setting is the maximum size of the queue in entries. If you
had 100 files to be mirrored and this was set to 16 (the default value), the
first thread would fill the queue to a maximum of 16 entries.
Values:
1 - 65535
Default:
16
GUI Setting: None
This value must be set prior to starting the mirror process. The higher the
number, the more memory that is used.
HBExternalRate Number of seconds between heartbeats
Values: 0 - 65535
Default: 3
GUI Setting: Server Properties, Network tab, Heartbeat, Time between
Heartbeats
HP recommends a value that is less than
10 (see HBTTL). Zero (0) turns the
heartbeats off.
HBInternalRate This entry is no longer used.
HBLoopback This entry is no longer used.
Server Setting Description