HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

13 - 9
LogAllOrphans Specifies whether orphan files are logged to the Storage Mirroring log on the
target
Values:0 Do not log the orphan files to the Storage Mirroring log on the
target
1 Log the orphan files to the Storage Mirroring log on the target
Default: 0
GUI Setting: Connection Manager/Restoration Manager, Orphans tab, Log
Orphaned Files to Target List
LogDir The location of the Storage Mirroring messages/alerts, verification, and
statistics log files
Values: any valid path
Default: the location where the Storage Mirroring files were installed
GUI Setting: Server Properties, Logging tab, Folder
LogFile The name of the Storage Mirroring messages/alerts log file
Values: any valid file name
Default:
DTLog
GUI Setting: None
LogMessageLevel Specifies the types of messages logged to the.dtl files
Values:
0 No messages will be logged
1 Only alert messages will be logged
2 Alert and release messages will be logged
3 Alert, release, and debug messages will be logged
Default:
2
GUI Setting: None
MaxChecksum
Blocks
Specifies the number of checksum values retrieved from the target
Values: any integer
Default:
32
GUI Setting: None
MaxConnections Number of network requests that can be processed simultaneously. Windows
is limited to 5 simultaneous requests.
Values: 0 - 65535
Default: 5
GUI Setting: None
HP recommends that you not change this value.
MaxLogFileSize Maximum size, in bytes, of any .dtl log file
Values:limited by available disk space
Default:
1048576
GUI Setting: Server Properties, Logging tab, Messages & Alerts, Maximum
Length
Server Setting Description