HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

14 - 19
Monitor Account Remove
Monitor Clear
Monitor Create
Command MONITOR ACCOUNT REMOVE
Description Removes the user account used to failover Active Directory
Syntax
MONITOR ACCOUNT REMOVE <monitor>
Options monitor—Name of the source machine designated as the monitor
Examples
monitor account remove alpha
Notes  If you do not specify a monitor, the current source designated as the
monitor will be used. If you have not identified a monitor, you will receive
an error message stating that a monitor has not been selected.
 Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
Command MONITOR CLEAR
Description Clears all of the failover configuration and monitoring parameters for the
specified monitor machine
Syntax
MONITOR CLEAR [monitor]
Options monitor—Name of the source machine designated as the monitor
Examples
monitor clear alpha
Notes
 If you do not specify a monitor, the current source designated as the
monitor will be used. If you have not identified a monitor, you will receive
an error message stating that a monitor has not been selected.
 Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
Command MONITOR CREATE
Description Establishes a source as a failover monitor. This is the machine that will be
monitored by a target in case it should experience a failure.
Syntax
MONITOR CREATE <source>
Options source—Name of the source
Examples
monitor create alpha
Notes Machine names that contain non-alphanumeric characters must be enclosed
in quotation marks.