HP StorageWorks Storage Mirroring for Linux Scripting Guide (T2558-96319, June 2009)

14 - 20
Monitor Delete
Monitor Display
Monitor Get
Command MONITOR DELETE
Description Deletes the specified failover monitor and all of its parameters
Syntax
MONITOR DELETE <monitor>
Options monitor—Name of the source machine designated as the monitor
Examples
monitor delete alpha
Notes
 In order to successfully delete a monitor, the monitor must not be running
on the server. Use the monitor stop command to ensure the monitor is
not running.
 Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
Command MONITOR DISPLAY
Description Displays the monitoring and failover configuration settings for the specified
monitor machine
Syntax
MONITOR DISPLAY <monitor>
Options monitor—Name of the source machine designated as the monitor
Examples
monitor display alpha
Notes
 If you do not specify a monitor, the current source designated as the
monitor will be used. If you have not identified a monitor, you will receive
an error message stating that a monitor has not been selected.
 Monitor names that contain non-alphanumeric characters must be
enclosed in quotation marks.
Command MONITOR GET
Description Retrieves and displays the machines that are currently being monitored by
the specified target machine
Syntax
MONITOR GET <target>
Options target—Name of the target, an IP address on the target, or a virtual IP
address
Examples
monitor get beta
Notes Monitor names that contain non-alphanumeric characters must be enclosed
in quotation marks.