HP StorageWorks Storage Mirroring Reporting Center user guide (T2558-96071, February 2008)

Storage Mirroring Reporting Center user guide 29
To run the Connection Status report, select a Storage Mirroring server in the tree. Right-click and select
Status Reports, Connections from the menu.
The following information is returned by this report:
•
Source—The name of the source server
•
Target—The name of the target server
•
Repset—The name of the replication set
•
Replication State—The status of the replication set
•
Mirror State—The status of the mirror
•
Transmission State—The status of the transmission
•
Target Paused—If selected, the target is not writing to disk
•
Connected—The timestamp showing when the connection was established
•
Running—The time the connection has been running
The following are optional fields that can be added to the report by selecting the Field Editor:
•
Server—The name of the Storage Mirroring server
•
Source IP Address—The address of the source server
•
Target IP Address—The address of the target server
Monitor status
The Monitor Status report displays information on the status of a Storage Mirroring monitors.
To run the Monitor Status report, select a Storage Mirroring server in the tree. Right-click and select
Status
Reports, Monitors
from the menu.
The following information is returned by this report:
•
Server—Name of the Storage Mirroring server
•
Name—Name identifying monitor, usually the name of the server being monitored
•
Status—Integer representing the monitor status (monitoring, failover condition met, failed over)
NOTE: This report will only be available on the machine being used to monitor your Storage Mirroring
source servers. It is
NOT accessible from the machines that are being monitored.
Protected time
The Protected Time report provides information on the percentage of time that data within a connection is
considered protected.
To run the Protected Time report, select a Storage Mirroring server in the tree. Right-click and select
Status
Reports, Protected Time
from the menu.
The following information is returned by this report:
•
Source—The name of the source server
•
Target—The name of the target server
•
Repset—The name of the replication set
•
Protected Time—The percentage of time the data was protected
•
Unprotected Time—The percentage of time the data was not protected
•
Mirror Time— The percentage of the unprotected time due to mirror activity
•
Mirror Duration—The amount of time for mirror activity
•
Total Mirrors—The total number of mirror tasks
The following are optional fields that can be added to the report by selecting the Field Editor:
•
Server—Name of the Storage Mirroring server
•
Source IP Address—The address of the source server