HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

13 - 13
Limit Bandwidth Disable
Limit Bandwidth Schedule Add
Command LIMIT BANDWIDTH DISABLE
Description Disables a bandwidth schedule without losing the schedule settings
Syntax
LIMIT BANDWIDTH DISABLE ON <target>
Options target—Name of the target, an IP address on the target, or a virtual IP address. Depending on the
network route Storage Mirroring uses to access the target, you may need to specify the fully
qualified domain name.
Examples
limit bandwidth disable on beta
Notes Target names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command LIMIT BANDWIDTH SCHEDULE ADD
Description Creates a scheduled bandwidth event for limiting transmission of data from the source to the target
Syntax
LIMIT BANDWIDTH SCHEDULE ADD <label> DAYS=<day1>[, day2,..., dayN]
STARTTIME=<hh:mm> LIMIT=<bytes>, <seconds> | UNLIMITED
TO <target>
Options  label—Unique name that identifies this bandwidth scheduling event
 Day1, Day2,..., DayN—Day(s) of the week that you want to schedule the bandwidth limitation for.
You can either spell out the entire day or use just the first two letters of the day.
 hh:mm—Time, using a 24-hour clock, to indicate when this event will start
 bytes—Number of bytes to be transmitted
 seconds—Number of seconds to wait before transmitting again
 UNLIMITED—Bandwidth is not limited during this scheduled event
 target—Name of the target, an IP address on the target, or a virtual IP address. Depending on the
network route Storage Mirroring uses to access the target, you may need to specify the fully
qualified domain name.
Examples
 limit bandwidth schedule add weekday days=Mo, Tu, We, Th, Fr
starttime=06:00 limit=19300 5 to beta
 limit bandwidth schedule add weekend days=Sa, Su starttime=04:00
limit=unlimited to beta
Notes  This command transmits in bursts, not bytes per seconds. The time identifies how long to wait
before transmitting again. For example, if 5 seconds are specified and it only takes 2 seconds to
send the specified bytes, Storage Mirroring will wait an additional 3 seconds before transmitting
again.
 Options that contain non-alphanumeric characters must be enclosed in quotation marks.