HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

13 - 15
Limit Bandwidth Schedule Remove
Load Source
Load Target
Command LIMIT BANDWIDTH SCHEDULE REMOVE
Description Removes a scheduled bandwidth event
Syntax
LIMIT BANDWIDTH SCHEDULE REMOVE <label> FROM <target>
Options  label—Unique name identifying the existing bandwidth schedule event that you want to remove
 target—Name of the target, an IP address on the target, or a virtual IP address. Depending on the
network route Storage Mirroring uses to access the target, you may need to specify the fully
qualified domain name.
Examples
limit bandwidth schedule remove weekdays from beta
Notes Options that contain non-alphanumeric characters must be enclosed in quotation marks.
Command LOAD SOURCE
Description Loads the Storage Mirroring source module
Syntax
LOAD SOURCE <machine>
Options machine—Name of the machine
Examples
load source alpha
Notes Machine names that contain non-alphanumeric characters should be enclosed in quotation marks.
Command LOAD TARGET
Description Loads the Storage Mirroring target module
Syntax
LOAD TARGET <machine>
Options machine—Name of the machine
Examples
load target beta
Notes Machine names that contain non-alphanumeric characters should be enclosed in quotation marks.