HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

2 - 4
Logging on and off of Storage Mirroring
To ensure protection of your data, Storage Mirroring uses native operating system security and requires a valid system
username and password. If you do not have a valid system username and password for a selected machine, you will not be
able to configure Storage Mirroring for that machine.
As you enter DTCL commands, Storage Mirroring automatically attempts to log on to the source or target machine. You can
verify your access by the resulting message.
 DT_Full_Access—You have administrator rights to the selected Storage Mirroring machine.
 DT_Monitor_Only_Access—You have monitor rights to the selected Storage Mirroring machine.
 DT_No_Access—You do not have any rights to the selected Storage Mirroring machine.
You can also verify your access at the top of the Text Client screen depending on the commands you have entered and the
information displayed in the upper half of the screen.
If you have monitor access or no access and want to log on as the administrator, use the
login command. Log off of a machine
by using the
logout command.
Command LOGIN
Description Log on to a Storage Mirroring machine
Syntax
LOGIN <machine> <username> <password> [domain]
Options  machine—Name of the machine
 username—Name of the user
 password—Password associated with the user name
 domain—If logging in using a domain account, this is the domain name. If logging in using a local
account, this is the machine name.
Examples
login alpha administrator ******
Notes
Command LOGOUT
Description Logs off of a Storage Mirroring machine
Syntax
LOGOUT <machine>
Options machine—Name of the machine
Examples
logout alpha
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.