HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

13 - 20
Monitor Create
Monitor Delete
Monitor Display
Command MONITOR CREATE
Description Establishes a source as a failover monitor. This is the machine that will be monitored by a target in
case it should experience a failure.
Syntax
MONITOR CREATE <source>
Options source—Name of the source
Examples
monitor create alpha
Notes Machine names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command MONITOR DELETE
Description Deletes the specified failover monitor and all of its parameters
Syntax
MONITOR DELETE <monitor>
Options
monitor—Name of the source machine designated as the monitor
Examples
monitor delete alpha
Notes  In order to successfully delete a monitor, the monitor must not be running on the server. Use the
monitor stop command to ensure the monitor is not running.
 Monitor names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command MONITOR DISPLAY
Description Displays the monitoring and failover configuration settings for the specified monitor machine
Syntax
MONITOR DISPLAY <monitor>
Options monitor—Name of the source machine designated as the monitor
Examples
monitor display alpha
Notes  If you do not specify a monitor, the current source designated as the monitor will be used. If you
have not identified a monitor, you will receive an error message stating that a monitor has not
been selected.
 Monitor names that contain non-alphanumeric characters must be enclosed in quotation marks.