HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

13 - 26
Monitor Stop
Monitor Use
NICList
Command MONITOR STOP
Description Stops monitoring the source machine for a failure
Syntax
MONITOR STOP <monitor> [ON <target_machine>]
Options monitor—Name of the source machine designated as the monitor
target—Name of the target, an IP address on the target, or a virtual IP address
Examples
monitor stop alpha on beta
Notes Option names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command MONITOR USE
Description Specifies the source machine designated as the monitor that will be used in subsequent monitor
commands
Syntax
MONITOR USE <monitor>
Options monitor—Name of the source machine designated as the monitor
Examples
monitor use alpha
Notes Monitor names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command NICLIST
Description Displays the NICs available on the specified target machine. Each NIC is assigned an integer value
and this value is used in the
monitor move command.
Syntax
NICLIST [target]
Options target—Name of the target, an IP address on the target, or a virtual IP address
Examples
niclist beta
Notes If you do not specify a machine name, the value from the current target will be returned. If you
have not identified a target, no data will be returned.
If you have not logged into the target machine, no data will be displayed.
Target names that contain non-alphanumeric characters must be enclosed in quotation marks.