HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

13 - 35
Resume Target
Schedule Clear
Notes
 The default settings for this command are overwrite, overwritenewer, usetargetdb, restoredbtoo,
and noorphans.
 The options can be used in any combination and in any order. The first option does not require a
comma, but the second and remaining options do require a comma before the option.
 The source command is required before each use of the restore command.
 If you are using the restore command with the Storage Mirroring DTCL interactive or batch
client (
dtcl -i or dtcl -f), the command requires the original source option. This option is
not required if you are using the Text Client.
 Options that contain non-alphanumeric characters must be enclosed in quotation marks.
Command RESUMETARGET
Description Allows you to resume the execution of Storage Mirroring operations on the target
Syntax
RESUMETARGET <target> [FROM <source>]
Options  target—Name of the target, an IP address on the target, or a virtual IP address
 source—Name of the source
Examples
resumetarget beta
Notes  You must be logged on to the target machine for this command to work.
 Options that contain non-alphanumeric characters must be enclosed in quotation marks.
Command SCHEDULE CLEAR
Description Clears the existing transmission schedule for the specified target
Syntax
SCHEDULE <target> CLEAR
Options target—Name of the target, an IP address on the target, or a virtual IP address Depending on the
network route Storage Mirroring uses to access the target, you may need to specify the fully
qualified domain name.
Examples
schedule beta clear
Notes Target names that contain non-alphanumeric characters must be enclosed in quotation marks.