HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

13 - 37
Schedule End
Schedule Start
Command SCHEDULE END
Description Sets criteria to end the transmission of data from the source to the target
Syntax
SCHEDULE <target> END [ DURATION = <number> <time_units> ][ BYTES = <bytes> ]
Options  target—Name of the target, an IP address on the target, or a virtual IP address Depending on the
network route Storage Mirroring uses to access the target, you may need to specify the fully
qualified domain name.
 number—Any number indicating the length of time before the transmission ends
 time_units—Minutes (min), hours (hr), or days (day)
 bytes—Number of bytes transmitted before the transmission ends
Examples
schedule beta end duration=3 hr bytes=1500000
Notes  If you use both of the end options, duration and bytes, the transmission will be stopped when
the first end option value is met.
 Target names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command SCHEDULE START
Description Sets criteria to start the transmission of data from the source to the target
Syntax
SCHEDULE <target> START [STARTTIME = <mm/dd/yy> <hh:mm>] [MEMLIMIT = <percent>]
[QUEUESIZE = <bytes>] [EVERY <number> <time_units>]
Options
 target—Name of the target, an IP address on the target, or a virtual IP address Depending on the
network route Storage Mirroring uses to access the target, you may need to specify the fully
qualified domain name.
 mm/dd/yy—Date in month/day/year format indicating when the transmission will begin
 hh:mm—Time in hour:minute format using the 24-hour clock indicating when the transmission
will begin
 percent—Any number between 0 and 100 indicating the percentage of system memory that must
be in use to initiate the transmission process
 bytes—Number of bytes that must be in the source disk queue to initiate the transmission
process
 number—Any number indicating how often the transmission process will be repeated
 time_units—Minutes (min), hours (hr), or days (day)
Examples
schedule beta start starttime=03/11/07 03:30, queuesize=10000, every 6 hr
Notes  The start option EVERY cannot be used by itself and cannot be the first option in a string of
options.
 If you use more than one start option, the transmission will begin when the first start option
value is met. Additionally, each option after the first must be separated by a comma, as illustrated
in the Examples.
 Target names that contain non-alphanumeric characters must be enclosed in quotation marks.