HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

13 - 44
Snapshot Delete
Snapshot List
Command SNAPSHOT DELETE
Description Deletes the specified snapshot(s) from the target
Syntax
SNAPSHOT DELETE <con_id> <snapshot_list_number | ALL | OLD [ GOOD | BAD ] > [ON <target>]
Options
 con_id—Connection ID assigned to the source/target connection
 snapshot_list_number—The snapshot number retrieved from the SNAPSHOT LIST command
 ALL—Deletes all snapshots
 OLD—Deletes only the oldest snapshot
 GOOD—If specified, deletes only good snapshot. If used with ALL, all good snapshots will be
deleted. If used with OLDEST, only the oldest good snapshot will be deleted.
 BAD—If specified, deletes only bad snapshots. If used with ALL, all bad snapshots will be deleted.
If used with OLDEST, only the oldest bad snapshot will be deleted.
 target—Name of the target, an IP address on the target, or a virtual IP address
Examples
 snapshot delete 1 3
 snapshot delete 1 all bad
 snapshot delete 1 oldest
Notes  Snapshots are labeled as good or bad depending on the state of the target at the time the
snapshot was taken.
 Target names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command SNAPSHOT LIST
Description Displays a list of snapshots associated with a connection
Syntax
SNAPSHOT LIST <con_id> [ON <target>]
Options  con_id—Connection ID assigned to the source/target connection
 target—Name of the target, an IP address on the target, or a virtual IP address
Examples
snapshot list 1
Notes Target names that contain non-alphanumeric characters must be enclosed in quotation marks.