HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

13 - 46
Snapshot Schedule Enable
Snapshot Schedule Every
Source
Command SNAPSHOT SCHEDULE ENABLE
Description Enables a disabled snapshot schedule
Syntax
SNAPSHOT SCHEDULE <con_id> ENABLE [ON <target>]
Options  con_id—Connection ID assigned to the source/target connection
 target—Name of the target, an IP address on the target, or a virtual IP address
Examples
snapshot schedule 1 enable
Notes Target names that contain non-alphanumeric characters must be enclosed in qutoation marks.
Command SNAPSHOT SCHEDULE EVERY
Description Configures and initiates a snapshot schedule
Syntax
SNAPSHOT SCHEDULE <con_id> EVERY <number> <time_units> [STARTTIME = <mm/dd/yy> [hh:mm] ]
[ON <target>]
Options
 con_id—Connection ID assigned to the source/target connection
 number—Any number indicating the frequency for the scheduled snapshots
 time_units—Minutes (min), hours (hr), or days (day)
 mm/dd/yy—Date in month/day/year format indicating when the schedule will begin
 hh:mm—Time in hour:minute format, using the 24-hour clock, indicating when the schedule will
begin
 target—Name of the target, an IP address on the target, or a virtual IP address
Examples
snapshot schedule 1 every 12 hours
Notes  Any existing snapshot schedules for this connection will be overwritten.
 Target names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command SOURCE
Description Identifies a machine as the active source machine
Syntax
SOURCE <source>
Options source—Name of the source
Examples
source alpha
Notes Source names that contain non-alphanumeric characters must be enclosed in quotation marks.