HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

8 - 4
Scheduling transmission criteria
You can clear an existing schedule, disable or enable the use of a schedule, and set start, stop, and window criteria.
1. To clear all existing transmission options, use the schedule clear command.
2. Enable transmission limiting when you want to apply any transmission options that have been configured. You can also
disable the transmission options without losing your settings. Use either of the following two commands to disable or
enable transmission limiting.
Command SCHEDULE CLEAR
Description Clears the existing transmission schedule for the specified target
Syntax
SCHEDULE <target> CLEAR
Options target—Name of the target, an IP address on the target, or a virtual IP address Depending on the
network route Storage Mirroring uses to access the target, you may need to specify the fully
qualified domain name.
Examples
schedule beta clear
Notes Target names that contain non-alphanumeric characters must be enclosed in quotation marks.
NOTE: All transmission options are stored on the source machine until they are either cleared or the option is
updated. At this time, there is not a command to display the existing transmission options.
Command SCHEDULE ENABLE
Description Enables the transmission schedule
Syntax
SCHEDULE <target> ENABLE
Options target—Name of the target, an IP address on the target, or a virtual IP address Depending on the
network route Storage Mirroring uses to access the target, you may need to specify the fully
qualified domain name.
Examples
schedule beta enable
Notes Target names that contain non-alphanumeric characters must be enclosed in quotation marks.
Command SCHEDULE DISABLE
Description Disables the transmission schedule without clearing the schedule data
Syntax
SCHEDULE <target> DISABLE
Options target—Name of the target, an IP address on the target, or a virtual IP address Depending on the
network route Storage Mirroring uses to access the target, you may need to specify the fully
qualified domain name.
Examples
schedule beta disable
Notes Target names that contain non-alphanumeric characters must be enclosed in quotation marks.