HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

12 - 10
HPQueueRatio Ratio of replication packets to one mirror packet
Values: 0 - 65535
Default: 5
A HPQueueRatio of 5 indicates 5 replication packets to
1 mirror packet.
GUI Setting: Server Properties, Source tab, Queue Ratio, Replication Packets to 1 Mirror Packet
If you change this value, the source service must be stopped and restarted to implement the
change.
IgnoreArchiveBit Specifies if the archive bit is compared during verification
Values:
0 Archive bit is compared during a verification
1 Archive bit is not compared during a verification
Default:
1
GUI Setting
: None
IgnoreDeleteOps Specifies if file and directory delete operations will be replicated to the target
Values:
0 Delete operations are replicated to the target
1 Delete operations are not replicated to the target
Default:
0
GUI Setting
: Server Properties, Source tab, Replication, Ignore Delete Operations
IgnorePPPAddresses Identifies if Storage Mirroring will use PPP (Point-to-Point Protocol) or SLIP (Serial Line Internet
Protocol) adapters
Values:
0 Storage Mirroring will send out heartbeats across the PPP/SLIP adapter
1 Storage Mirroring will not send out heartbeats across the PPP/SLIP adapter
Default:
1
GUI Setting
: None
IgnoreThumbnail
Streams
Specifies if thumbnails will be replicated to the target.
Values:
0 Storage Mirroring will mirror and replicate all data streams
1 Storage Mirroring will not mirror or replicate any data about the alternate data streams
for thumbnail images. When comparing data for a verification or difference mirror,
alternate data streams for thumbnails will not be reported as different.
Default:
1
GUI Setting
: None
If you change this value to 0, you must restart the Storage Mirroring service in order for the
Storage Mirroring driver to begin sending all data stream information to the service. If you change
this value to 1, you do not need to restart the service.
IgnoreWriteFailure
OnTarget
Specifies whether failures to write a file on the target are logged
Values:
0 Log all write failures on the target
any integer larger than 1 Indicates the number of write failures which will be ignored
before starting to log the write failures
Default:
0
GUI Setting
: None
InstallPath Path specified during the Storage Mirroring installation
Values: any valid path
Default: specified during installation
GUI Setting: None
InstallVersionInfo Installation number specified during the Storage Mirroring installation. Do not modify this entry.
Server Setting Description