HP StorageWorks Storage Mirroring scripting guide (T2558-96074, February 2008)

13 - 7
Email Get Email Config
Email MailServer
Email Remove
Command EMAIL GET EMAILCONFIG
Description Displays e-mail notification configuration information
Syntax
EMAIL GET EMAILCONFIG
Notes You must have an active source specified for any e-mail command to work properly.
Command EMAIL MAILSERVER
Description Specifies the name of the SMTP mail server for e-mail notification
Syntax
EMAIL MAILSERVER <server_name | ip_address> [username ][password]
Options  server_name—Name of the SMTP mail server
 ip_address—IP address of the SMTP mail server
 username—User ID required for SMTP server authentication
 password—Password associated with the specified user name
Examples
email mailserver xchng administrator *******
Notes  Your SMTP server must support the LOGIN authentication to supply a username and password.
If your server supports a different authentication method or does not support authentication,
you may need to add the Storage Mirroring server as an authorized host for relaying e-mail
messages. This option is not necessary if you are sending exclusively to e-mail addresses that the
SMTP server is responsible for.
 You must have an active source specified for any e-mail command to work properly.
 Options that contain non-alphanumeric characters must be enclosed in quotation marks.
Command EMAIL REMOVE
Description Removes an e-mail address from the e-mail notification distribution list
Syntax
EMAIL REMOVE <email_address>
Options email_address—An e-mail address, listed in the current distribution list, enclosed in quotation
marks
Examples
email remove "[e-mail]"
Notes You must have an active source specified for any e-mail command to work properly.