HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

16 - 5
Connect
Command CONNECT
Description Establishes a connection between a replication set and a target machine
Syntax
CONNECT <repset> TO <target> MAP EXACT
| MAP BASE <
target_path>
| MAP <source_path> TO <target_path> [,...]
[MIRROR | NOMIRROR] [, REPLICATE | NOREPLICATE]
[, MONITOR | NOMONITOR] [, ORPHANS | NOORPHANS]
[, COMPRESSION <
level>] [CLEARRESTOREREQUIRED]
[ROUTE=<
target_IP>]
Options
 repset—Name of the replication set
 target—Name of the target, an IP address on the target, or a virtual IP
address
 MAP EXACT—Specifies that the replication set data will be sent to the
same logical volume on the target (c:\data and d:\files is copied to
c:\data and d:\files, respectively)
 MAP BASE target_path—Substitute a complete path, including the
volume, for target_path and the data will be replicated to
target_path\SrcVolName on the target machine
Options
 MAP source_path TO target_path—Custom location that specifies
each directory on the source and where that data will be copied to on the
target machine
 ...—Indicates that the source_path TO target_path option can be used
more than once for each source directory in the replication set
 MIRROR—Automatically initiates a mirror when the connection is
established
 NOMIRROR—Does not initiate a mirror when the connection is
established
 REPLICATE—Automatically initiates replication when the connection is
established
 NOREPLICATE—Does not initiate replication when the connection is
established
 MONITOR—Specifies that the target is going to monitor the specified
source machine for failover. The source machine must have already been
defined as a monitor machine.
 NOMONITOR—Specifies that the target is not going to monitor the
source machine for failover
 ORPHANS—Moves or deletes orphan files on the target. Orphan files will
not be immediately processed when you create the connection. This
setting is for processes that are run after a connection is already
established (remirror, auto-remirror, verification, and so on).
 NOORPHANS—Does not move or delete orphan files on the target
 COMPRESSION level—Enables compression of data being sent to the
target at the level specified. Valid levels are 1 (minimum), 2 (moderate),
or 3 (maximum).
 CLEARRESTOREREQUIRED—Clears the restore required flag and
initiates the connection
 ROUTE=target_ip—Specifies the IP address on the target that will
receive the incoming Storage Mirroring data