HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

16 - 45
Schedule Start
Command SCHEDULE START
Description Sets criteria to start the transmission of data from the source to the target
Syntax
SCHEDULE <target> START [STARTTIME = <mm/dd/yy> <hh:mm>]
[MEMLIMIT = <
percent>] [QUEUESIZE = <bytes>]
[EVERY <number> <time_units>]
Options
 target—Name of the target, an IP address on the target, or a virtual IP
address Depending on the network route Storage Mirroring uses to access
the target, you may need to specify the fully qualified domain name.
 mm/dd/yy—Date in month/day/year format indicating when the
transmission will begin
 hh:mm—Time in hour:minute format using the 24-hour clock indicating
when the transmission will begin
 percent—Any number between 0 and 100 indicating the percentage of
system memory that must be in use to initiate the transmission process
 bytes—Number of bytes that must be in the source disk queue to initiate
the transmission process
 number—Any number indicating how often the transmission process will
be repeated
 time_units—Minutes (min), hours (hr), or days (day)
Examples
schedule beta start starttime=03/11/07 03:30,
queuesize=10000, every 6 hr
Notes
 The start option EVERY cannot be used by itself and cannot be the first
option in a string of options.
 If you use more than one start option, the transmission will begin when
the first start option value is met. Additionally, each option after the first
must be separated by a comma, as illustrated in the Examples.
 Target names that contain non-alphanumeric characters must be
enclosed in quotation marks.