HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

16 - 50
Set
Set Local
Command SET
Description Modifies the value of a Storage Mirroring program setting for the specified
server
Syntax
SET <setting>=<value> [machine]
Options
 setting—See the table Double-Take Server Settings on page 10-2 for
a complete list of the Storage Mirroring program settings
 value—See the table Double-Take Server Settings on page 10-2 for a
complete list of the Storage Mirroring program settings
 machine—Name of the machine
Examples
set netport=1100
set DefaultAddress="129.12.34.3"
Notes
 Some settings, although immediately applied to Storage Mirroring, will
not take effect until the service is restarted.
 If you do not specify a machine name, the value from the current source
will be updated. If you have not identified an active source, no changes
will be made.
 Options that contain non-alphanumeric characters must be enclosed in
quotation marks.
Command SETLOCAL
Description Modifies the value of a Storage Mirroring program setting for the local
machine
Syntax
SETLOCAL <setting>=<value>
Options
 setting—See the table Double-Take Server Settings on page 10-2 for
a complete list of the Storage Mirroring program settings
 value—See the table Double-Take Server Settings on page 10-2 for a
complete list of the Storage Mirroring program settings
Examples
setlocal netport=1100
setlocal VerifyLogName="HA server.log"
setlocal DefaultAddress="129.12.34.3"
Notes
 Some settings, although immediately applied to Storage Mirroring, will
not take effect until the service is restarted.
 Program setting values that contain non-alphanumeric characters must
be enclosed in quotation marks.