HP StorageWorks Storage Mirroring Scripting Guide (T2558-96327, April 2009)

16 - 62
Verify
Command VERIFY
Description Verifies the integrity of the data between the source and target machines.
Syntax
VERIFY <con_id> [ SYNC [,NEWER] | NOSYNC]
[,CHECKSUM | NOCHECKSUM] [STARTTIME=<
mm/dd/yy> [hh:mm]]
[EVERY <number> <time_units>] [ORPHANS | NOORPHANS]
[CLEARRESTOREREQUIRED]
Options
 con_id—Connection ID assigned to the source/target connection
 SYNC—Synchronizes any data that is different
 NEWER—Synchronizes only those files that are newer on the source than
on the target
 NOSYNC—Do not synchronize any data that is different
 CHECKSUM—Compares and/or synchronizes those blocks that are
different on the source than on the target based on checksum
comparisons
 NOCHECKSUM—Does not perform a checksum comparison when
comparing and/or synchronizing files
 STARTTIME—Starts the verification process at the time specified
 mm/dd/yy—Date in month/day/year format when the verification
process will begin
 hh:mm—Time in hour:minute format using the 24-hour clock when the
verification process will begin
 EVERY—Repeat the verification process at the frequency specified
 number—Length of time to repeat the verification process
 time_units—Minutes (min), hours (hr), or days (day)
 ORPHANS—Moves or deletes orphan files on the target
 NOORPHANS—Does not move or delete orphan files on the target
 CLEARRESTOREREQUIRED—Clears the restore required flag and
initiates the verification
Examples
 verify 1
 verify 2 sync, newer
 verify 2 every 2 hr
Notes The default verification settings are sync, checksum, and noorphans.